Easy Crochet Ghost Pattern for Beginners

Finished white crochet ghost with a soft ruffled skirt and embroidered face for Halloween
Free Pattern
One Piece
Beginner Friendly

Easy Crochet Ghost Pattern

Crochet a small Halloween ghost from the top down, add a simple ruffled skirt, close the base and finish it with an embroidered face.

Pattern by Rimraam Crochet

LevelBeginner
Hook3.5 mm
SizeAbout 4.5 in
TermsUS Crochet

Crochet ghost pattern: this small Halloween ghost is worked from the top down in continuous single crochet rounds. A ruffled skirt is added into the front loops, while the unused back loops are used to close the base underneath. The result is one compact ghost with no separate body pieces to sew together.

How do you crochet an easy ghost?

Start with six single crochet stitches in a magic ring and increase to 30 stitches. Crochet several even rounds, work a soft ruffle into the front loops, then rejoin the yarn to the unused back loops and decrease to close the base. Add stuffing before the final decrease and embroider a simple face on the front.

This construction keeps the project simple while still giving the ghost a clear floating shape. The ruffle hides the closed base, so the finished ghost looks soft and flowing rather than like a plain crochet ball.

Make the first ghost in white, then try cream, pale lavender, mint or soft pink for a small Halloween collection. These ghosts work well as shelf decor, party favors, ornaments or pieces for a handmade garland.

Materials for the crochet ghost

Materials for an easy crochet ghost including white yarn, crochet hook, fiberfill, stitch marker, tapestry needle and scissors
A smooth medium weight yarn makes the stitches easy to see and keeps the little ruffle defined.

You will need

  • 45 to 65 yd (41 to 59 m) medium weight #4 yarn in white or cream
  • small amount of black yarn for the face
  • optional pink yarn for cheeks
  • 3.5 mm crochet hook
  • polyester fiberfill
  • stitch marker
  • tapestry needle
  • scissors

Which yarn works best?

Smooth worsted weight acrylic or cotton blend yarn is easiest for a first ghost. Plush chenille can also work, but the stitches and unused back loops are harder to see.

Stitches and abbreviations

US crochet terms

  • MR = magic ring
  • sc = single crochet
  • hdc = half double crochet
  • inc = 2 sc in the same stitch
  • dec = single crochet decrease
  • sl st = slip stitch
  • FLO = front loop only
  • BLO = back loop only
  • st / sts = stitch / stitches

Pattern notes

The head and body are worked in continuous spiral rounds. Do not join after each round. Move the stitch marker to the first stitch of every new round.

For the hidden base, use invisible decreases if possible. They make the lower surface smoother and keep the stuffing from showing.

The abbreviations above follow standard US crochet terminology. You can review the Craft Yarn Council crochet abbreviations if you need a quick reference.

Finished size

Using medium weight #4 yarn and a 3.5 mm hook, the finished ghost should measure approximately 4 to 4.5 in (10 to 11.5 cm) tall and about 4 in (10 cm) wide across the skirt.

Gauge is not critical for this decorative project. Use a hook that creates a firm fabric so the stuffing stays hidden.

Crochet the head and body

1

Start the magic ring

Make a magic ring and work 6 single crochet stitches into the ring. Pull it closed and mark the first stitch.

Round 1: 6 sc

2

Increase to 12 stitches

Work 2 single crochet stitches in every stitch around.

Round 2: 6 inc = 12 sts

3

Increase to 18 stitches

Repeat one single crochet followed by one increase around.

Round 3: (1 sc, inc) x 6 = 18 sts

4

Increase to 24 stitches

Repeat two single crochet stitches followed by one increase around.

Round 4: (2 sc, inc) x 6 = 24 sts

5

Increase to 30 stitches

Repeat three single crochet stitches followed by one increase around.

Round 5: (3 sc, inc) x 6 = 30 sts

White crochet ghost body being worked in continuous single crochet rounds with a stitch marker
Once you reach 30 stitches, the next rounds build the soft cylindrical body below the rounded head.
6

Work the body straight

Single crochet once in every stitch around for seven rounds. Keep moving your stitch marker so you do not lose the beginning of the round.

Rounds 6 to 12: 30 sc

Crochet the ruffled ghost skirt

Close-up of a white crochet ghost with a soft scalloped ruffle worked into the front loops
The ruffle is worked into the front loops only so the back loops remain available for closing the base.
7

Work 10 soft scallops

Working in the front loops only, repeat the following around: slip stitch in the next stitch, 3 half double crochet in the next stitch, slip stitch in the next stitch.

Round 13 FLO: (sl st, 3 hdc in next st, sl st) x 10

Fasten off after the final scallop. You should still be able to see a full ring of 30 unused back loops directly behind the ruffle.

Close the hidden base

8

Rejoin in the unused back loops

Join the white yarn to any unused back loop behind the ruffle. Work three single crochet stitches, then one decrease. Repeat around.

Base Round 1: (3 sc, dec) x 6 = 24 sts

9

Decrease to 18 stitches

Repeat two single crochet stitches followed by one decrease around.

Base Round 2: (2 sc, dec) x 6 = 18 sts

10

Add the stuffing

Fill the ghost with small pieces of fiberfill. Keep the head rounded and the lower body slightly softer so the ruffle can sit naturally.

11

Finish the decreases

Repeat one single crochet and one decrease around. On the final round, decrease six times. Cut the yarn, thread it through the remaining front loops and pull the opening closed.

Base R3: 12 sts. Base R4: 6 sts

Embroider the ghost face

Hands embroidering a simple black face onto a finished white crochet ghost
A few small embroidery stitches are enough to give the ghost a simple friendly expression.

Use black yarn or embroidery thread to make two small vertical eyes between approximately Rounds 7 and 8. Leave about four stitches between them.

Add a tiny curved mouth one or two rounds below the eyes. If you want a softer look, embroider a short pink stitch under each eye for cheeks.

For a hanging ornament, attach yarn at the top center, chain 14 to 18, and secure the chain back into the same area.

Common crochet ghost mistakes

The head is not round

Check the increase rounds carefully. Missing one increase can make the top lean to one side.

The ruffle curls upward

Relax your tension on the three half double crochet stitches. Tight stitches can pull the scallops inward instead of letting them flare.

I cannot find the back loops

Before starting the ruffle, look closely at the top of the stitches. Work only through the front loop so the back loop stays visible behind the new stitches.

Stuffing shows through

Use a slightly smaller hook or remove some fiberfill. The ghost should feel full but not stretched.

Frequently asked questions about crochet ghosts

Is this crochet ghost suitable for beginners?

Yes. You need to know a magic ring, single crochet, increases, decreases and basic half double crochet. The project has no separate body pieces to sew together.

Do I need safety eyes?

No. The face is embroidered with yarn or thread, so safety eyes are not required.

Why is the skirt worked in the front loops only?

Working the skirt through the front loops leaves the back loops free. Those unused loops become the starting point for the hidden closed base.

Can I make the ghost larger?

The easiest way is to use thicker yarn and a suitable hook. This keeps the stitch counts the same while increasing the finished size.

Can I use chenille yarn?

Yes. Plush chenille makes a soft ghost, but the front and back loops can be harder to see. Use a stitch marker and check each round carefully.

Can I hang the finished ghost?

Yes. Add a short chain loop at the top and use the ghost as an ornament, garland piece or Halloween party decoration.

Quick pattern to save

  1. R1: 6 sc in MR.
  2. R2: inc around = 12.
  3. R3: (1 sc, inc) x 6 = 18.
  4. R4: (2 sc, inc) x 6 = 24.
  5. R5: (3 sc, inc) x 6 = 30.
  6. R6 to R12: 30 sc.
  7. R13 FLO: (sl st, 3 hdc in next st, sl st) x 10.
  8. Rejoin yarn in unused back loops.
  9. Base R1: (3 sc, dec) x 6 = 24.
  10. Base R2: (2 sc, dec) x 6 = 18.
  11. Stuff the ghost.
  12. Base R3: (1 sc, dec) x 6 = 12.
  13. Base R4: 6 dec = 6. Close.
  14. Embroider the eyes, mouth and optional cheeks.

Rimraam tip

Before you start the ruffle, place a removable stitch marker through one unused back loop. It makes the ring much easier to find when you come back to close the base.

A little ghost for Halloween

One small ball of yarn, a few simple rounds and a soft ruffled edge are enough to make a Halloween ghost you can repeat in different colors.

Note: finished size, yarn use and working time are approximate and can vary with yarn, hook size, tension and stuffing. This Rimraam pattern is editorially developed and should be checked on a sample before publication if exact finished measurements are important.

Helpful crochet ghost video tutorial

If you want to see the general top-down ghost construction and ruffled bottom before starting, this English tutorial from Nicole Chase is a useful visual reference. The stitch counts are different from the Rimraam pattern above, so follow the written Rimraam instructions for this version.

Video: external English-language tutorial on YouTube. The Rimraam written instructions above remain the main pattern for this project.

Leave a Comment